Subject: Griffin Oil cooler pressure test
From: ACRE
Date: 11/24/2003, 9:14 PM

Al Gietzen wrote:

Al, wasn't Griffin the supplier of the oil cooler that failed in
Chuck Harberts turbo 3 rotor? Perhaps you have a different one.
What does the box it came in look like?
Chuck's oil cooler came in a box that had a yellowish appearance.<

Paul;

Chuck's was an off-the-shelf unit; not custom made.  I have no idea
who/where it was made, but I also believe the failure was at least
partially installation related - not necessarily inherent to the unit. I
believe the failure was due to fatigue in the tank wall near the
connecting line due to vibration in the line (unsupported), coupled with
high pressure.  Because of a long, small dia line to multiple coolers,
the first cooler in line (the one that failed) was likely seeing pump
bypass pressure (I think 125 psi).

Just my take on it; Chuck may disagree.

Al

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.