Subject: Griffin Oil cooler pressure test
From: ACRE
Date: 11/25/2003, 11:11 AM


Al Gietzen wrote:

Al, wasn't Griffin the supplier of the oil cooler that failed in
Chuck Harberts turbo 3 rotor? Perhaps you have a different one.
What does the box it came in look like?
Chuck's oil cooler came in a box that had a yellowish appearance.<

Paul;

Chuck's was an off-the-shelf unit; not custom made.  I have no idea
who/where it was made, but I also believe the failure was at least
partially installation related - not necessarily inherent to the unit. I
believe the failure was due to fatigue in the tank wall near the
connecting line due to vibration in the line (unsupported), coupled with
high pressure.  Because of a long, small dia line to multiple coolers,
the first cooler in line (the one that failed) was likely seeing pump
bypass pressure (I think 125 psi).

Just my take on it; Chuck may disagree.

Al


I was just reading that Chuck's engine was surging the oil pressure to 200
psi every time on start up. Looks like he had some oil pressure valve
problem?
Bulent

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.