Hey George,
The comments from AMSOIL Tech Services are about the use of
synthetic
engine
oil in the engine.
The extra strength and cleaner burning of a synth 2-cycle oil
makes them
an
excellent option as well, but only if mixed in fuel or if the
injector
source is modified.
Later Mate,
Andy
Commercial AMSOIL Dealer
Andy,
Where are you mate!
Got an e-mail address for me to contact you direct.
lendich@hypermax.net.au
George
Hey Guys, keep in mind that Jim over at Racing Beat recommended Amsoil
synthetic
for a long time until they got in a marketing pissing contest with Amsoil
about 5
or six years ago. Now Racing Beat is carrying their own line of oil called
Royal
Purple. SO far it would appear that Royal Purple has the same properties
as
Amsoil. Coincidence? I have been a long time user of Amsoil and there has
been
many companies that have started after them to provide them with a little
competition. I still swear by Amsoil oil filter systems. They are second
to none.
Price is what you pay for, Quality.
Doug
Doug Mueller
RX-6 13BT
N900DM
Henderson,NV
Hi Doug,
I'd like to talk with you off-list - I'd like to learn what went down
with the folks at RB.
Royal Purple has been around since 1986, mainly in the oil fields and
other industrial applications. They're a fairly recent addition to the
synth arena (AMSOIL in '72, everyone else since). They're good products, in
the same league as Mobil 1's US formulations and other mainstream
synthetics. They're not extended drain products, however. Compared to
AMSOIL products, RP has higher volatility, less-robust cold weather
performance, lower wear protection, lower acid neutralizing ability, and
weaker viscosity stability. The SW regional RP rep made it clear to me that
their target is Mobil 1 and they recommend factory drain intervals. I
wouldn't consider RP to be competition for AMSOIL from either a corporate
posture or from a technical/performance standpoint.
For our rotaries, and their oil injection system, extended drain intervals
aren't really an issue as we're regularly adding makeup oil. Even the
lowest performance full synthetic will outperform the best straight
petroleum oil - lower wear, less friction, better heat transfer, higher and
lower temperature performance, lower volatility, no or very light
sludge/varnish production as a start.
I would loan an oil sample pump and sample kit to someone flying with
either Ross' or Tracy's gearbox. I'd like to see if we need a lube with
better high temperature/high shear performance - is the oil shearing down to
a lighter viscosity due to the gear drive? Maybe a couple of samples -
petroleum and synthetic?
Just my creeping off-topic $.02.
Andy
ahecker@satx.rr.com
210 392-3631
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.