Subject: Turbo 3 rotor flying boat crash.
From: ACRE
Date: 11/25/2003, 2:34 PM


Paul, This guy was in my chapter of the EAA. (EAA 663 Livermore) 
We(the chapter)are of two minds about this crash.  First EAA 663 
has some of the best technical counseling around. This guy was 
very much a loner. He did not take advantage of the help available 
to him. He was very secretive about his design. The design was 
supposed to be based on the Lake amphibian but that is all we really 
know about his aircraft. He had built a previous example that mysteriously 
burned to the ground just before test flight. Lastly I offered to help 
with engine set up and he refused. This was after he mentioned that 
he was having trouble setting up the fuel injection. (don't know if 
he used Tracy's) All right, I'll just say it the guy was weird. His 
engineering seems to have been flawed. The first version was build 
from kevlar weave. (not the best material for a boat as it absorbs 
water!) So I have serious doubts about Dick's engineering. Second 
item: EAA 663 has one of the absolute best first flight assistance 
and documentation programs around. These guys are top builders, with 
at least 10 Lindys among the active members. The assistance program 
was ignored!

Getting back to the of two minds thing, we were all saddened by the 
loss. We were also rather pissed off that he didn't let us help him 
and then killed himself and gave the Homebuilt community a black eye. 
I never even saw a picture of the second cut of the design prior to 
attempted flight.
For the group's information I am the VP of EAA chapter 663
 Bill Jepson

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.