Ken Welter wrote:

  Just looking at photos of the six pinion planet and wandered if
there is enough room to put six bolts between the gears to bolt the
planet to the prop shaft flange ??

   Ken

There is not really enough meat between the pinions to use bolts.
What I would do Ken is replace the pinion shafts with hard shoulder bolts.
That is what I am proposing with the large hollow shaft design.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.