Subject: Turbo 3 rotor flying boat crash.
From: ACRE
Date: 11/26/2003, 8:33 AM


When I first heard about this crash I did not know who it was and when
it happened so I assumed it was Tom Parkes as he had the only turbo 3 rotor
flying that I knew about. So I called Tom and thankfully he called me back. 

Before he called me back I took a look at some of his construction
pictures to see if I could see anything related to high exhaust
temps that might cause problems. Here is a feature that could cause 
problems. The exhaust manifold might  burn through and melt 
the rubber intake pipe coupling causing a loss of power. I mentioned 
this to Tom and Tom told me it is well shielded and he is already 
keeping and eye on it. 

Tom's manifold is Inconel but SS or worse mild steel does not hold up 
as well. A Lancair ES also has plenty of room and there is plenty 
of space between Tom's exhaust and the turbo air outlet manifold.

It would be best to route the intake pipe up and away from the 
exhaust manifold in a more compact installation.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.