Guys;

This is another method for treating the 195 (8:30) mounting hole dilemma....I
was waiting to see if anyone would suggest this very obvious solution, but no
cigar 8(

Simply use a one inch dia (25mm) aluminum spacer or, a rectangular spacer
same as Tracy uses.....An internal 2mm machined bump as foundation is
required and the Starters snout hole machined to a depth of 1mm as a
guideline for those who want to mount the Starter in this location, can
finish punching this hole out.

I'm done with this, and moving on......Scott hang in there, 180 is coming.

Wishing all of you a SAFE, HEALTHY and HARMONIOUS Thanksgiving

Butch

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.