Perry Casson wrote:
Hi All,
Pleased to announce that rotary powered Glastar C-GSPC has finally left
the
ground today for a few circuits. Left wing is a bit heavy, my EGT were
different by 70 degrees at WOT, found a couple rough spots in the MAP
table
that did not show up with ground runs and a minor oil leak that I
thought
was fixed is back so I guess there is a bit more tuning to do. It was
0C
(32F) OAT and oil and water never got above 185F.
Thanks to Paul and the rest of the crew on ACRE for the information and
ideas shared, it's been a great help.
Perry Casson
http://eaa154.dhs.org/perry (offline for a day or two)
Congratulations Perry.
Paul Lamar
John Gibbons wrote:
Congratulations Perry,
You have to have a few glitches, that's what the next 25 hours are for.
Besides who would believe you if you said it was perfect ? The heavy wing is
easy to fix, just genlty bend the trailing edges of your ailerons as though
they were trim tabs, not too much though, it is surprising how little
deflection will correct the trim issue. Once it is dialed in you will not be
able to see any difference. How did you finish up weight wise ? I look
forward to hearing some performance numbers and hopefully some pictures.
John
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.