able to see any difference. How did you finish up weight wise ? I look
forward to hearing some performance numbers and hopefully some
pictures.
Perry Casson wrote:
My Glastar came in at 1202lbs which is respectable and leaves a 758 lb
useful load. I didn't collect much for performance numbers yet but will
post them as I progress. I've got lots of pictures on
http://eaa154.dhs.org/perry unfortunately that server is going to be
down
for a couple more days.
Attached is a photo from before I put the wheel pants on parked with her
0-320 powered sister that a friend of mine just completed last month.
Once
we are both fully operation we should be able to do some very
interesting
comparisons between the two engines as the rest of the airplanes are
virtually identical. He won the empty weight contest by 52 lbs but
interestingly only about 28 lbs different on the nose gear. Most of the
difference comes from having a heavier hand build cowl and the heavy but
effective spintech muffler.
Perry Casson
I got some old pictures of Perry's motor mount.
Paul Lamar
Perry,
At that weight I would anticipate some very good performance numbers.
Looking at the pictures made me think of your nose wheel fairing. Stoddard
made them very snug to try and get them streamline, the problem with them is
that when you hit a bump or drop the nose a little heavy, the tire will
bulge and catch the fairing. It doesn't destroy them but will bash them up
pretty good. You might want to check yours, I believe a half inch or so gap
should be adequate. I guess that as you're in Regina we won't be seeing any
floats going on soon ? I will check out your site when it is back up.
John
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.