> > > John Vlake wrote:
> > > >
> > > > Gentlemen:
> > > > On the advice of Paul Lamar ,I'm turning to you what it takes to promote
> > my
> > > > web page! Take a look at it and let me know,please!!
> > > > Cheers John
>
> > > In order to do that John we need the address of your web page :) You
> > forgot
> > > to upload it this time. Also, I might add, it would be nice to see some
> > pictures
> > > of the parts of your PSRU or a drawing of the internals so people can see
> > > what they are buying and compare it to other PSRU's now on the market.
> > > I personally would not buy a PSRU unless I could examine the design
> > > in this manner.
> > >
> > > Paul Lamar
>
> > > Hi, Paul....When you click on his web site www.gapprsu.com if you click
> > on the photo alblum icon, there are several photos showing the Ford
> > planetary gears, shaft, flywheel, etc. Don't know if you noticed this. Paul
> > Conner
>
> Thanks Paul. I wasn't able to get in. I'll give it another try.
>
> Paul Lamar
OK Looks good John. You may need to do another casting for the Mazda as the
bell housing diameter is 16" OD and roughly 12.5 ID. We use the
2nd gen RX7 auto tx flex plate. Unless of course you want to supply an adapter,
flywheel/ring gear and starter to fit the Mazda E-shaft and balance weight
for the smaller diameter bell housing.
Also what does it weigh?
I notice it is a 2.17:1 ratio. The trend in the Mazda market is to 2.85:1
or even 3.17:1 particularly with the advent of the 238 HP 8500 RPM RX8 engine.
Any plans for a six pinion 2.85:1 version?
Paul Lamar
Hello Paul! Yes I've been looking for the 6 pin.2.85:1 unit
and have trouble locating one! If I could have a part
number that would help! I have a 2.17 :1 6 pin. Cheers John.
----- Original Message -----
From: "Luke Epstein" <lepstein@slauson.com>
To: "Wholesale List" <wholesale@lists.slauson.com>
Sent: Wednesday, November 26, 2003 1:01 AM
Subject: [Slauson Wholesale Special] SLAUSON TURKEY SPECIAL
These specials are good until I start carving the bird.
Happy Thanksgiving to all.
Who says you get get anything for a buck...
X4N809AN - AX4N DIRECT MOLDED RUBBER PISTONS - $1.00
70040BN - 700 REAR PLANET WITH SLINGER - $21.00
70040BBN - 700 REAR PLANET WITH SLINGER (TORRINGTON BEARING) - $25.00
4607654BN - 4T60E 4TH CLUTCH HUB - EARLY WITH BEARING - $21.00
4607654CN - 4T60E 4TH CLUTCH HUB - LATE 96+ - $21.50
E4D15FN - E4OD 6 PINION FRONT PLANET - $38.00
E4D41BN - E4OD FRONT PLANET HUB & BEARING - $9.00
RL415DN - MAXIMA FRONT PLANET - $47.00
518225X - 518 O/D PLANET, SUNGEAR, BEARING/PLATE - EARLY - $65.00
518225XA - 518 O/D PLANET, SUNGEAR, BEARING/PLATE -LATE - $70.00
Luke Epstein
Sales Manager
Slauson Transmission Parts
800-421-5580 #406
310-768-2099 #406
fax-310-768-8298
Wholesale mailing list
Wholesale@lists.slauson.com
http://lists.slauson.com/mailman/listinfo/wholesale
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.