Richard wrote:

Another significant step for the next test series is complete. 
The porting as shown in the picture. If y'all remember, the P-P
is in addition to one side port.
I hope this partial S-C configuration results in what I expect, 
meaning P-Port advantage at higher RPM and still good idle
stability at lower RPM without a lot of additional mechanical gadgets.

Richard Sohn
N-2071U
unicorn@gdsys.net
www.gdsys.net/WWWmembers/unicorn/

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.