Subject: [Coot] Protected by Composite/wood Construction
From: ACRE
Date: 12/5/2003, 3:09 PM


 > > > >  >      >     Them composite planes hold up to a beating pretty good
 hu.
 > > >>       >
 > > >>       >    Ken


 > > >>  Ken, It is interesting to note that the construction of a Rutan
 style
 > > >>  male-molded fuselage is made exactly the way that crash
 > > >>  helmets are made. The outer layer of fiberglas with a foam filler.
 > > >>  The ez has a inner shell as well but not nearly so heavy as
 > > >  > the outside. Seems to do the impact absorbsion pretty well. Bill
 Jepson
 >
 > >    That is the way I built my coot also as the hull has to pound on
 > > waves and a log now and then.
 > >   Made from 3 layers of glass, 1/4 inch foam, 2 layers of glass and
 > > 1one layer of  kevlar.
 > >
 > >    Ken

 Ken,
 I'm having a discussion on the Vision with one member about core thickness -
 does the Coot have 1/4" core all over including the hull.
 TIA.
 George (down under)


    Not as plans call for but I tossed the plans in the trash can
where they belong and went on my own.
   I cut the mold and stretched it 24 inches longer and made the whole
hull a foam core and that is the only way I offer them now.
   The rest of the coot is just glass panels were strength is not an
issue and foam core where needed.

   Ken


 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.