Not as plans call for but I tossed the plans in the trash can
where they belong and went on my own.
I cut the mold and stretched it 24 inches longer and made the whole
hull a foam core and that is the only way I offer them now.
The rest of the coot is just glass panels were strength is not an
issue and foam core where needed.
Ken
Ken,
Sorry to labour this mate, but what made you select 1/4".
I assume many of the 'like type' of aircraft use solid hulls - they are very
heavy, was the Coot plans the same.
I'm interested in what you chose 1/4" instead of 1/2".
I don't want to get into the details of the other discussion, but your
selection of 1/4" appears to be inline with other advise I've received.
BTW I didn't know you were building these Coots, I thought it was a one-off
building program.
Good work if you can get it!!
George (down under)
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.