Subject: [Coot] Protected by Composite/wood Construction]
From: ACRE
Date: 12/6/2003, 8:21 PM

Ken Welter wrote:

 > > >     Not as plans call for but I tossed the plans in the trash can
 > > where they belong and went on my own.
 > >    I cut the mold and stretched it 24 inches longer and made the whole
 > > hull a foam core and that is the only way I offer them now.
 > >    The rest of the coot is just glass panels were strength is not an
 > > issue and foam core where needed.
 > >
 > >    Ken


  Ken,
 Sorry to labour this mate, but what made you select 1/4".
 I assume many of the 'like type' of aircraft use solid hulls - they are very
 heavy, was the Coot plans the same.
 I'm interested in what you chose 1/4" instead of 1/2".
 I don't want to get into the details of the other discussion, but your
 selection of 1/4" appears to be inline with other advise I've received.

 BTW I didn't know you were building these Coots, I thought it was a one-off
 building program.

 Good work if you can get it!!
 George (down under)

    The coot plans call for a solid glass hull with wood bulkheads.
  The way I made hull with the foam core cut 20 lbs from the hull and
made it much stronger and I made the bulkheads from foam core also
which cut some weight.
  I will send you some photos of the construction of my hull, also I
am about start building my new composite wings and I will send you
the letters and photos  that I send into the coot group of that
construction as it goes along, I hope to have the new wings on by
spring.
  I was also advised by others to use 1/4 inch foam and I looked at
the way others were built and in fact I saw some others that used
foam as thin as 3/16 inch.
  Yes I had to buy the coot molds from Molt Taylor to build my first
coot but I am getting out of doing the glass work myself and going to
farm it out except for my own projects.

   Ken

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.