George Lendich wrote:

"Schertz, William W." wrote:

Paul,
The previous attempts seemed to have a glitch. Try this one

Bill Schertz
KIS Cruiser #4045

Bill was first with the solution. I used Linux xv to capture the pdf
screen Bill sent since not everybody has a pdf viewer.

Bob White also used Star Office to convert to a pdf file.
Bob White's pdf file is 100k while the total on these three gifs is
about 30K. Bill Schertz used somewhat lower rez to convert it to a pdf
file and his came out at 56K. It is also attached for those with a pdf

viewer.

Plain text would be way less than that. The planet diagram alone
in gif form is only 5K. The plain text would be less than 2K or so.

In the future my suggestion is do the table in simple email message
form (plain text) and send any diagrams as either attached jpg's, gif's or
horror of all horrors bmp's since brain dead MS Paint cannot convert to
gif's or jpg's. I can convert bmp's to jpg's or gif's.

Paul Lamar

Paul,
Is that good enough 'for the records' or would you like me to do it again on
e- mail with Gif attachments.
I don't think it would come out much better except maybe the drawings, if I
did them again, but that would take a little time.
Perhaps good enough for the time being, with something better at a later
time !!?
George

No need to do it over. I have plenty of that stuff. All you need do is ask.
Drawings are all important. Rhino 3D images have been a huge improvement in my
ability to get ideas across. Fancy and different size type fonts on text 
nobody remembers. All they remember is the hard information in that text. 
Email works as good as anything when it comes to text.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.