Bob,
I would guess that the odds are greater than 50% that this engine is
dead because the internals are all gunked up with carbon deposits and
other stuff. This engine will most likely require a teardown to clean
the insides. This will restore movement to the apex seals (and the
other rotor seals as well) so compression will be restored. The only
hard part is dealing with all the Mazda smog junk. Cost is only about
$100 for gaskets unless something is broke inside the engine, which
really isn't very likely.
Ken Powell
Ken does that $100 price include all new O-rings?
One of these days someone ought to take an engine out of one of these
cheap cars and mount it plugs down. Then fill it up with carb cleaner
or some other cleaning solvent, let it sit for awhile and see if it will
get the gunk out. Repeat as necessary. Worth a try.
Paul Lamar
Andy Hecker wrote:
Paul,
This is exactly the type of cleaning that AMSOIL's Power Foam was
formulated for. It's a heavy duty cleaner and degreaser that foams and
expands when dispensed. This is the stuff I sent to Royce to try for rotor
cleaning.
I just cleaned my upper piston ring grooves on my VW turbo diesel the
exact way you just described - filled the cylinders with foam and let it
soak thru to de-carbon/de-coke the ring grooves.
The usual use for the product is to spray it into the intake of a running
engine until the engine quits and just let it soak. It really does an
excellent job.
Andy
ahecker@satx.rr.com
I don't see how foam is going to get into apex seal slots.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.