I had thought about sticking with the spring damper with a

flywheel

     > but now I think I may try that damper made by PYI.
     >
     >   Ken

     I don't know Ken. My spline eliminator might take all of 20

minutes to make

     on a lathe.

     Paul Lamar

You could use the Ringfetter elements to attach the shaft as well

Paul.

The new smaller ones would work great for that job. They
just need a cylindrical bore and holes to pull the push plate. They
hold like a weld, they use them on train wheels. Bill Jepson

I am not sure I know what that is. Is that the right spelling? Google
has nothing.

Paul Lamar

OK here it is Ringfeder.

Paul Lamar

-Richard wrote:

I am using Ringfeder to hold the flywheel on the Single Rotor. It is a neat
solution, you have to very particular about the torque requirements on the
screws holding the pressure plate.

Richard Sohn
N-2071U
unicorn@gdsys.net
www.gdsys.net/WWWmembers/unicorn/- 

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.