Richard Girard wrote:
An old German mechanic once showed me how to de-carbon a VW engine
before overhaul. Werner called it the poor man's overhaul.
Mix kerosene and water 50 / 50 (yeah I know it doesn't mix, but if you
keep shaking the container it's good enough), start the engine, raise
the rpm to about 3000, and spray the mix down the carburetor throat. Use
enough to make the engine gag, but not so much that it dies during the
process. You'll need enough mix to run the engine for about five
minutes. Works like a charm. On tear down, I found the piston tops and
combustion chambers free of carbon and only mildly sooted. Don't let the
engine set afterward or you'll get rust in the engine. If you can't tear
the engine down right then, drain the oil and spray oil down the spark
plug holes
Rick Girard
Yes but what works if the engine does not run?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.