Don Dunbar wrote:

Hello Paul,

  I will be in the Us from the 16 to 19th in Seattle and them 2 days
  in Vancouver. Are there any members of the news letter up in that
  part of the world.
  As I have now got a Renesis engine I have been designing a new 2.85
  PRSU drive. There is not a lot of change from the 2.17 except the
  outer ring gear is clamped up by the forward and back housings. I
  will use a spline on the output side with a hollow shaft as per the
  2.17 unit.
  Sorry that I will not be down in the South to catch up with you.
  The cold North is not my cup of tea either but Business calls again.
  I will talk to the Dynon Development people whilst I am there as I
  now have two unit in my planes and it is really good.

--
Best regards,
 Don                          mailto:ddunbar@echidna.id.au

Absolutely. Brian Trubee will probably volunteer to show you around.
Don't forget a trip to Dennis Hayes Rotary Engineering in Redmond.

Paul Lamar

A> "Joe Hull (Pilgrim Technologies)" wrote:

Don - If you've got any interest in seeing a Cozy Mk-IV in progress and
soon to be sporting a rotary engine - let me know - I'm in Seattle as
well.

A> I think Don has left already Joe.

A> Paul Lamar

A> The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
A> ACRE NL web site. http://home.earthlink.net/~rotaryeng/
A> Copyright 1998-2003 All world wide rights reserved.

Hi Joe,
I am staying at the Warrick hotel and i have just spocken to Richard
Martin at 9.00 pm to night.
As yet I don't know what time I have to see thing's but I will know
tomorrow after my first meeting with my client.
The number here at the hotel is 206 4481662 and my room is 814.

--
Best regards,
 ddunbar                            mailto:ddunbar@echidna.id.au

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.