How about a large properly triangulated space frame using steel tubing
surrounding the entire engine? Front and rear motor plates. That would
give you a front chassis structure to hang the front
suspension off and
give you service access to the the engine.
I'll do a 3D of what I am talking about.
Paul Lamar
Paul, one of the possibilities for stiffening would be
honeycomb panel using carbon fiber. A 2" deep plate on the
bottom of the engine, (like the box they are planning) would
work while being super light. Bill Jepson
I think the surrounded space frame would be at least ten times stiffer.
The torsional stiffness of a hollow tube goes up with the
radius to the fourth power. That is why I have advocated
back bone frames like the Lotus Elan, Current Corvette and the
RX8 since I wrote an article about it for Sports Car Graphic in
1966 called Moncoque Chassis Design. Colin Chapman invented
the large X sectional area sheet metal back bone frame but Porsche and Tatra
understood the principle long before that. Ferdy Porsche used it on the
VW. There is a monument to Tatra truck with a back bone
frame in Siberia. I digress :)
I know you know this Bill but this is for the non engineer layman.
Assume the 2" by 12" honeycomb is area equivalent to a 4 inch radius tube
and I am giving it the benefit of the doubt here.
That is 4 X 4 X 4 X 4 = 256
If we go up to a 12 inch radius that a rotary will fit inside
that will be 12 X 12 X 12 X 12 = 20,736 or 80 times stiffer.
This is the fundamental relations ship. A space frame is
basically a hollow tube. As usual the devil is in the details
so that is why it must be properly triangulated on all six sides.
BTW the RX8 chassis is flawed in this regard. One or two light weight
diagonal braces under the tunnel and they could reduce the chassis weight
in other places. Probably the rocker panels.
Don't get me wrong. The RX8 back bone frame is remarkably stiff as is.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.