I suspect that ultimately this will prove to be the best solution for
aircraft use as it will cut the frontal area of the rad and
make it easier
to fit under the cowl.
Paul Lamar

Paul, I like this idea. The question I have is, does it matter which 
side the hot water goes into? Does it give a better delta T if the hot
water goes in the trailing or leading core first? My guess is that if 
the hot went in the trailing core you would get a slightly better delta. 
That is a guess though as it might not matter. Bill Jepson

To maximize the average delta T the hot water goes in the back side
first.
 
Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.