Bulent Aliev wrote:

I need some advise on oil filter relocation adapter. I don't have access to
a machine shop to make one, so I have to buy it. Mazdatrix sells one, "oil
block adapter $48.31"  but I want another opinion on it. Thanks.
Bulent

Summit Racing sells them for $12.95 if you are talking about the remote
filter holder that mounts on the firewall. Just plumb the oil output
from the front cover to the filter holder and then to the oil cooler.
Mount it level with the top of the engine so all the oil does not
syphon out when you remove the filter.

All you need on the back of the block where the filter normally goes
is a bolted down flat plate With a groove that connects the two holes. 
The groove can be made with a die grinder. 

Or you can do what Ian did. Here are some pics.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.