Dale Smith wrote:

Just thought I would tip the forum to this:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2450075294&category=33615

The gear box is dangerous as the stock shaft diameter is not up to the gyro 
bending loads loads imposed by a prop. There is no way to put a large enough shaft
in the stock gear box. Also the gears themselves are marginal for continuos
high HP use. Trash the gear box.

The test stand alone is worth $500 if you need one. I am thinking
of bidding. Last thing I need in the hangar however is another test stand :)
The engine is worth probably about $1000. 12A engines are not very costly
on the used market. Only the road racers use them and that is because the
SCCA forces them to use them :)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.