Subject: Oil Pressure, Temperature, & Re-Drive feed
From: ACRE
Date: 12/23/2003, 10:51 PM


"Joe Hull (Pilgrim Technologies)" wrote:

 I'd like to put an oil pressure, temperature, and re-drive oil feed line
 into the stock hole under the oil filter (1986 13B).
 Anyone know:

 1. The size of the hole in metric - It's close to 1/8 NPT so I'm
 guessing it's M-16 x 1.5?

 2. Got any leads on a Tee with male metric on one thru side, 1/8 NPT on
 the other thru side (for pressure/temperature), and Dash-6 male tube in
 the middle (for feeding the redrive)?

   Male Metric M-16 x 1.5 ?
     |
     |
     ------  Dash 6 to 3/8 flared tube
     |
     |
 1/8 NPT female

 Joe Hull
 Cozy MkIV #991 (working on Engine & Cowling)
 http://www.maddyhome.com/canardpages/pages/JoeHull/index.html

It is definitely a tapered thread. Not M16 1.5 which is straight. Probably
a metric pipe thread if there is such a thing.

I am thinking of taping mine out to 1/8 NPT or perhaps 1/4 NPT.
I just want to use a simple pressure gage.


Search Google for metric hose fittings. Klause showed me a catalog
so they are definitely out there. I'll try to get the phone number
again. They may not have a web site.

Paul Lamar


   I cut off a stock oil sender unit and tap it out to 1/8 pipe to
make an adapter.

   Ken

Sounds like a good plan Ken.

BTW got the blades. they look fine for the dyno. Will bond back on
the delaminated parts. Thanks a bunch. Merry Christmas.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.