"Joe Hull (Pilgrim Technologies)" wrote:
I'd like to put an oil pressure, temperature, and re-drive oil feed line
into the stock hole under the oil filter (1986 13B).
Anyone know:
1. The size of the hole in metric - It's close to 1/8 NPT so I'm
guessing it's M-16 x 1.5?
2. Got any leads on a Tee with male metric on one thru side, 1/8 NPT on
the other thru side (for pressure/temperature), and Dash-6 male tube in
the middle (for feeding the redrive)?
Male Metric M-16 x 1.5 ?
|
|
------ Dash 6 to 3/8 flared tube
|
|
1/8 NPT female
Joe Hull
Cozy MkIV #991 (working on Engine & Cowling)
http://www.maddyhome.com/canardpages/pages/JoeHull/index.html
It is definitely a tapered thread. Not M16 1.5 which is straight. Probably
a metric pipe thread if there is such a thing.
I am thinking of taping mine out to 1/8 NPT or perhaps 1/4 NPT.
I just want to use a simple pressure gage.
Search Google for metric hose fittings. Klause showed me a catalog
so they are definitely out there. I'll try to get the phone number
again. They may not have a web site.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.