Bulent Aliev wrote:

Please bear with me. I'm hot on working on the engine and will have lots of
questions.
I pulled out the oil filler tube from the engine and will need a freeze plug
to close it. Did anybody do that, and where did you get the plug and the
size. Or I have to start canvassing the auto parts stores.

Paul suggested I move it to the Crank angle sensor location and it looks
good there. I think if I can find an old core crank angle sensor I can cut
it and make an oil filler base from the part that fits in the cover.
Later I will ask how to make the trigger located on the flywheel.

Bulent

The hardware store has rubber plugs that have a bolt through them.
You tighten the bolt and plug expands sealing the hole.

Paul Lamar

Thanks Paul.
Bulent

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.