Bulent Aliev wrote:

Please bear with me. I'm hot on working on the engine and will have lots of
questions.
I pulled out the oil filler tube from the engine and will need a freeze plug
to close it. Did anybody do that, and where did you get the plug and the
size. Or I have to start canvassing the auto parts stores.

Paul suggested I move it to the Crank angle sensor location and it looks
good there. I think if I can find an old core crank angle sensor I can cut
it and make an oil filler base from the part that fits in the cover.
Later I will ask how to make the trigger located on the flywheel.

Bulent

The hardware store has rubber plugs that have a bolt through them.
You tighten the bolt and plug expands sealing the hole.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.