Jerry Bass wrote:

I am going to start the engine tomorrow and put this tube into the 
center hole from the front. I will use the Air Speed to tell if it 
is drawing air. Then take the thing off and send it to you.

The rear, "front of the car" exhaust port will slope upward a 
bit to get thru my engine strut look around modification to the 
front leg of the engine mount.

Jerry Bass
540-932 3124

Be careful Jerry. We are dealing with up to 1700 degrees F here.
I would hate to see you burn your aircraft to the ground.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.