Subject: Can Am "kart" car
From: ACRE
Date: 12/28/2003, 10:45 PM

Ulf Bredberg wrote:

Dear Paul.

I have found the remaines of the Can Am car that you built together
with Jerry Titius for sale. I wonder if you can help me with some
history of the car, as the only I know is what was written in Sports
Car Graphic June 1970: Did you build any body to the car?

No body was ever built. I was wondering what happened to this race car.
Can you send me some pictures of what you have?

Did you make any drawings of the car and the body?

I probably did but I don't have copies. The body no but I can :)

Do you know anything about the handling of the car?

Yes. Jerry said it stored energy in the frame and released the
energy and jumped side ways when it hit a bump on the skid pad.
I personally observed this but I did not drive it around the skid
pad myself.

The problem with the oscillation of the car, came the oscillation from
tyres or the frame? 

I think it was the frame as it had little or no damping.

The fans should have had a capacity of 12000 cfm at
a pressure of 0.5psi, could that have helped the roadholding and
handling of the car? 

0.5 psi with a car that is 70 inches wide and 150 inches long will
result in about 5,000 pounds of down force while the car is sitting still 
in the pits:) That translate into 5G cornering at all speeds.
 
What kind of engine did you use, was it an
Olds/buick? 

It was an Olds/Buick aluminum block V8 now built in England by Rover.

Did you ever raced the car?  No.

At last do you remember what the weight was of the car? 

No I don't but my guess is under 1000 pounds as it was mostly just engine, wheels,
tires, brakes  and go cart frame. 

That was a lot of questions that I should be
very happy if you could  help me to anser, as I think that the car is
very interesting as a forerunner to the Chapparall fan car that you
designed. Maybe you can tell me even more abot the history of the car.
I should appreciate it very much if you helped me with some history of
the car, you might even have some photos of the car that you can mail
me. 

Best Regards

Ulf Bredberg
Stagnellsgatan 5
S652 23 Karlstad
Sweden

No photos. I was hoping you could take some. 
It was built while the Chaparral sucker car was still in development and before the
Chaparral sucker car was raced. I also left Chaparral before the sucker car
was ready to race. I then designed and had this car built. I knew we were having 
problems with the Chaparral sucker suspension travel due to the high static down force
so this was a failed attempt to eliminate all suspension travel. Not 
to say this very simple approach to a sucker car won't work. Jerry and I 
just ran out of time and development money. Perhaps with larger and stiffer tubing.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.