Mark Wrathall wrote:
All this talk of Titanium exhausts is muddling anedots. Cars have Titanium
mufflers, you can buy titanium exhausts for a bike, jet engines use
titainium. Not relevant!
Current state of the art Titanium alloys are good for about 820°K (550°C
1020°F) This is a very dull dark red. possibly visible at night.
Powersport's engine was being cruised at 1200°K (930C 1700°F) This is bright
orange.
Tracy leans to 1030°K (760°C 1400°F). This is red.
Are titanium alloys used in jet engines - yes, in the cold bits. The Turbine
exhaust, after 4 to eight stages of turbine have extracted nearly all the
energy. In the Compressor, until you get to about 20:1 compression. Any
engine with a higher pressure ratio will have nickel based alloy blades in
the back stages of the HPC, due to the temperature rise cause by
compression. Often the Low pressure turbine disks are titanium, but they are
cooled.
Titanium may work for a downstream muffler, if you can keep it's temp down.
On a bike, you can even wrap the mufflers in carbon fiber or aluminium for
looks, thats how cold they are.
Ti will not last as a header for the 13B with our duty cycle.
Your choices for the header are very heavy cast iron from Mazda, heavy thick
wall low alloyed stainless steels like Ed has, lighter medium walled 321
stainless like Tracy uses, or thin but pricy Inconel.
Forget titanium.
Mark
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.