Don Dunbar wrote:

Hello Paul,
Well using the front housing from the Renesis engine on the 13B may
not be feasible as the front housing is 20 mm or 3/4" wider so they
could accommodate the exhaust port. With the exhaust inserts the
passages have become very small, it must be all they need as Mazda
would have done something else. I am drawing up the port details on
cad now. I have print outs from the electronic parts manual and they
show the center exhaust port to be round this wrong.


--
Best regards,
 Don                          mailto:ddunbar@echidna.id.au

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.