Bulent Aliev wrote:

Considering I got rid of the standard crank angle sensor, I have to make-up
for it. John Slade installed the magnetic trigger by the main belt pulleys
per Bruce Turrentine's suggestion. I was wandering if someone can provide
some installation guidance, since john was not quite sure. He gave me the
extra metal ring he had (that attaches to the pulley) and one magnet [reluctor
pick up]. I need one more magnet [reluctor pick up]. Where do you get these?
Thanks,
Bulent

Tracy should know how to do this. The reluctor pick up can be bought from Mazda.
They are also called inductive proximity sensors.
You should be able to buy one from the RX8 engine soon or the third gen for sure.
The same type of sensors are used on anti lock braking systems. Usually
one on each wheel. The beauty of the reluctor pick up is it does not require
(unlike a hall effect sensor) a magnet to operate. Any ferrous metal
discontinuity will trigger it such as a tooth on a gear. It is also
a very simple and reliable device being many turns of fine wire wound
around a metal core.

There is a company called Omron that makes them with built in conditioning
electronics and a open collector transistor output for a nice clean pulse.
They can sense metal changes up to 5 mm away. Digi Key catalog TO33 page
1144. About $50 to $60.

Paul Lamar

You can buy them here for half price.

http://web1.automationdirect.com/adc/Overview/Catalog/Sensors_-z-_Encoders/Inductive_Proximity_Sensors

Check with Tracy and see if they will work with his computer.

Paul Lamar

 Bulent Aliev wrote:

Hi Don,
Do you have a picture of the crank angle sensor? Tracy thinks I can use it
on my 13B Cosmo, and where I can get one?
Thanks.
Bulent

Did you ask Tracy if you can use a open collector output transistor?
If so you can save a lot of money. I am sure you will be able to buy them from 
Mazda sooner or later but the cost will be astronomical.


Paul Lamar

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.