Subject: Mag pick up and toothed ring.
From: ACRE
Date: 1/19/2004, 6:20 PM


Subject: Mag pick up and toothed ring.

Bulent Aliev wrote:

I need one of these trigger rings from RX-8. Don't want to
cannibalize
the
engine I have. Any Ideas where I can get one?
Bulent


Unbolt it and make a pattern. Then have it plasma cut out of sheet
steel.
Tracy is supposed to have one on order from Mazda but you could upload
the pattern here and we could all have one made if we needed it.

Bulent,
Have you tried to find an FD (93-95) trigger ring? It does not look
exactly like that, but with the same triggers it would work. Also that
single trigger 'looks' just like one of the FD triggers as well. Did the
split timing change on the rx8?
[Marc Wiese]

The 3rd gen 93 to 95 requires two inductive sensors while the RX8 requires
only one. The split timing can be done in the computer with only one sensor.

Paul Lamar


I have two of the FD(93-95) rings, but Tracy told me he is working for
himself on the RX-8 setup and it is simpler with the single sensor. He said
that his computer can be updated to work with the RX-8 setup.
Bulent

Which one would he rather use? Paul Yaw's single sensor ring or the RX8 single
sensor ring. I don't want to build a bunch of these unless it is necessary.

Paul Lamar

Why don't you ask him? I don't want to be the relay messenger :)
You know what questions to ask.
bulent

OK I'll call him since he is not answering his email.

OK he said Mazda is only charging $87.60 for the whole works. Sensor
trigger ring and a few other misc. bolts and nuts. No point
in making them if they are that cheap. He wants to standardize
on the Mazda parts. Sorry Paul Yaw.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.