Subject: The only way to build a rotary engine motor mount.
From: ACRE
Date: 1/21/2004, 5:09 PM

With all the muffler ideas out there like the tuned tangential muffler,
the simple tangential muffler, the VAM and the turbo charger I have
slowly come to the conclusions that this is the only way to build a motor
mount. You need as much clearance around the exhaust side of the engine
as you can get and this is the best way of doing it. I call it the beam
mount. The beam and the upper diagonal brace must lie in the same
plain. It must also be laterally braced under the oil pan.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.