Subject: Wanted investors for new rotary engine.
From: ACRE
Date: 1/21/2004, 5:47 PM


     There is a licensed manufacturer of Freedom Motors engines that
plans to be
     > in production by Q2-04. Will they get to market? I don't know
yet. But, when
     > they do, Rotary Applications International will have engines to
sell into
     > the amateur-built and experimental aircraft marketplace.

Dear Eric,
 In other words you would like someone to design and build a PSRU for
you
so that WHEN the motor comes out YOU will be ready to market it? Do you
really think someone capable of manufacturing a good reduction gearbox
is going to be STUPID enough to build something on spec. for a motor co.
that
has proven to be much delayed and shows NO data on dyno runs,
development
or manufacturing capability?

 Take a look at another alternate engine builder, Deltahawk and get a
clue.
While I intend to use a 20B mazda in my aircraft I'm a engine enthusiast
who
would like to see all types of engine succeed. Deltahawk was very open
about
design intents, goals, and more importantly test data good or ill. They
are now
FLYING and SHIPPING beta test engines. It is so difficult
to finish developing any complex product that the manufacturer
who wants the customer to take a chance on them caries the burden of
proof themselves. The reason we, (well at least me as I can't speak for
everybody),
are skeptical is we have seen too many people get sucked into spending
their
money on bullshit vaporware causing GOOD manufacturers to go begging
since people don't want to be burned again.

 The rotary is a excellent engine that happens to be difficult to
manufacture.
I am absolutely certain that there is a market for another rotary, after
the
engine has been shown to be successful. AND the engine must be
reasonably
priced. We (rotary engine enthusiasts) are tired of being teased.
Write back when you have a RUNNING ENGINE ON A TEST STAND OR DYNO.
Then tell us where we can go to see it running. Then you can go to the
PSRU
guys. Otherwise don't waste my time.
Respectfully,
Bill Jepson

Right on  Bill!

Paul Lamar


I was hoping to get a Deltahawk diesel engine. However, after talking to
them for several years, and every year I was told "Next year for sure"...I
finally gave up. They are now selling engines to customers, and they haven't
even run theirs long enough to find out what the true TBO might be. Scary.
      There have been other engine companies I was hopeful that might
succeed, such as Mecanair.  Powersport actually produced an engine, but I
feel that they priced themselves out of the market. Even the Subaru based
firewall forward packages are getting out of hand.  I'm thinking that most
of us on this list are on the right track....by building our own affordable
rotary powered engines/installations that have already stood the test of
time by contributors such as Tracy Crook, Ed Anderson, and others.
      Add me to the list of sceptics regarding the "new" rotary.   Paul
Conner, 13b powered SQ2000 almost finished.

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.