Bulent Aliev wrote:

Hi Paul,
The main pulley diameter on the Cosmo is 128mm about 5". The trigger wheel
should be about 135mm I guess?
I just mailed you the RX-8 one Priority USPS.
--

Bulent

I got the RX8 trigger wheel Bulent. Thanks. The good news is it fits
the 2nd gen E-shaft flange weird bolt pattern. I am not yet sure about the 
timing but Tracy could handle that in software.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.