Subject: Powersport and Bill J
From: ACRE
Date: 1/29/2004, 2:10 PM


Tedd,
 I am going to write on this subject once more. First, to present my own
personal situation, and second to offer some clarification.
 COST is MY FIRST, LAST, and MIDDLE consideration. I am not wealthy,
 and work a 9 to 5'er. I have changed the plane I wanted to build
several times, not due to wanting to but because of COST. I first
looked at Lancairs, (who didn't) fast good looking and, to my despair
hideously expensive. Second I looked at Glassairs, nice kits but at
the time the company was having money problems. The new Glassair
company is doing a good job, but alas again the kits were too expensive.

 I then had the good fortune of running into Rich Trickel, and the KIS.
I was ready to buy, (in fact negotiating the loan), when Rich sold the
kit line to PULSAR. They have done a good job carrying on the KIS line
but raised the price 10K over what I had agreed to pay to Rich. Bummer.

I was pursuing a 4 place since I am a big guy, over 6' and heavy at
 near 300. I don't want a 30" wide cockpit or even a 36"! The Vans
2 place kits would be fine but I am a press fit in any of the 2 place
machines. The RV 10 came out and I bought one as fast as I could. I
believe I'm in the first 20. The Kit price is still probably going
to be more than I would like but I can take my time. Vans will be here
for a while.


 I have long been a alternate engine fan and I was able to acquire
a 20B for $2500 in what seems like good shape. I looked at the
Powersport conversion but could not afford it.

 I still like the Powersport reduction drive. The clarification
I think needs be made on the powersport drive is the tooth contact
 comment Paul made. The Powersport drive has multiple tooth contact
 built into the design and should handle power well. The design went
the "high stiffness" route which I personally like as an engineer.
Tracy went the low stiffness route, a different but equally valid
approach.

I spent time speaking to Steven W. the engineer of the
drive. He is a knowledgeable professional engineer and could qualify
all of his compromises. Tracy openly discusses the design trade
offs on his site as well. My problem is once again the cost. Tracy
needs make fewer parts since his design uses auto trans parts. It is
much cheaper than Powersports. I won't argue the Planetary/ring gear
reduction, other than to say that planetary MUST be held to VERY close
tolerances if it is to be successful. There is no way to adjust the
sun gear centerline and to achieve the multiple tooth contacts we desire
in the six pinion carrier the accuracy needed is ±.001 inches. Far from
impossible but difficult.

Many of the Ross failures I have seen I would
attribute to sun gear misalignment, (causing single tooth engagement
until the drive tooth deflects enough to engage the next pinion),
over stressing the single or perhaps two teeth in contact. This is
never more important than is the 20B turbo producing higher continuous
power. Tracys units look very well made. If I buy one I still plan to
do a 100% inspection to assure myself of the units accuracy. The
Powersport unit is adjustable on pinion contact, an excellent feature.
I also like the integrated flywheel and counter weight, which buys
back some of the weight difference.

 There, I have offered both sides of the story. Even if I preferred
the Powersport unit, cost, $6500 list plus more if I want to use
the Powersport engine mounts, may price it out of my range. Tracy
offers an great price, and I can get several ratios which I like.
I differ from Paul in that I am not a complete planetary affectionado.

Tedd the one thing in which I TOTALLY agree with Paul is that if you
want to sell units you must, fly that thing all over the country. You
need to take a hard look at the radiator location since you lose
tremendously by mounting against the firewall. Paul has PROVED
his point here and has often given out the NACA data and SAE papers
to back up what he says.

 WE (capitals), all the rotary lovers, must remember the words of
Ben Franklin, "We must all hang together, or we will all surely hang
separately". I think the rotary is a great aircraft engine and I intend
to prove it in my plane prices permitting.
Bill Jepson

PS. Tedd the vans engines are ALL certified, they don't even offer
an non certified version since they are brand new from Lycoming!
Don't try to wriggle around about prices, face facts as we the
customers must. Mattituck, a fairly well known engine builder,
is offering the ASSEMBLED superior TMX IO-360 200 HP engine at
$18,800 and Fadec equipped at $23,900 These are experimental
engines built from certified parts. WRJ

 Bill,
 I couldn't agree more about COST - I will go one step further and use the
current trendy terms
"Value for Money" and "Cost Effectiveness".

I go to the local Aeroclub and listen to those 'well heeled' self
opinionated aircraft owners telling me that Flying is expensive and if you
can't afford it, you shouldn't be involved.

Well I got news for them - this attitude has seen flying costs go through
the roof, flying schools going broke and Recreational flying declining at a
dramatic rate. There are a lot of jobs being lost and business going to the
wall because of this attitude. No matter how unique and attractive a sport
or hobby is - it can only be sustained if those in the market can afford it.

BTW Bill have you looked at the Vision 4 place, Carbon fuselage and carbon
spar - a bloody beauty, cost effective and real value for money, if you
don't mind working with the designer and other 4 place builders, as this is
a prototype exercise. I believe you could do it!!
George (down under)


 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.