Butch is very pedantic with his drawings, but said he will have the final
     >
     > > > done shortly for any further group suggestions.
     > > > But I got to tell you we have done this thing to death, there a couple of
     > > > ways to do things but usually only one way to suit all installations, which
     > > > makes things a compromise, which is definitely the case with the 6 O'clock
     > > > starter position.
     > > > George (down under)
     > >

George,
Please be encouraged by the fact that I wouldn't have
any problem with your very first effort! (And I should say
I am anything but easy to please.) I only hope that
there will be enough demand to give you some payback
for your work. I really like what you and Butch have been
doing. Stay with the kiss principle. I think you have
already done something good and are proceeding toward
superb. I know you have already busted your bum to get
a working first article. I have built a few products myself
and I'm sure you are now in the "why the hell did I start
this project phase." Keep on and all should be worth it!
Respectfully, Bill Jepson

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.