Guys;

Here's something I failed to mention:

Scott/Pushers/Tandems,....The 6 o'clock Starter and MM style Bellhousing

can

be cut-down in width by 3" as indicated by the yellow dashed lines (See
attachment).

Butch

Butch,
Would you recommend welding in a plate rather than leaving the end open.
My thinking is eliminating possible flexing and optimising stress transfer.
George

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.