Richard Konnen wrote:
Paul,
If you ran alcohol instead of gas or water injection could you run more
boost if using a non-turboed engine?
Richard Konnen
Yes if turboing a non turbo engine. The big problem with experimenting
along these lines is one or two detonations can fracture the three piece
2 mm apex seals. That in turn can destroy and expensive rotor housing. If you
are going to do this kind of experimenting change the apex seals to
the 2 piece 3 mm variety. This means the rotor slots must be ground
out from 2 mm to 3 mm. There is a good possibility the new RX8 style 2 mm
2 piece apex seals now available for the 13B from Mazda will also
solve this problem but so far we have had no feed back from the field.
Unfortunately the three piece seals turned out to be a disaster
for the turbo engines with anything more than the stock boost
and a perfectly working fuel injection system. If a fuel pump
or injector failed or some other problem causing the mixture
to go lean the engine would detonate and fracture the stock
2 mm three piece seals.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.