Edward Klepeis wrote:
Dear Rotary people
Take a look at this PSRU from can. see if it would
be anything you would want javlakeca@yahoo.ca
Regards
Ed
tech welding
John Vlake is on here and has contributed some articles recently.
John is also using the Ford C6 A40D planetary gear set.
Paul Lamar
Paul,
I think it was John Vlake who suggested the 10 or 11 O'clock starter
position - but don't ask me why.
George (down under)
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.