pieces. A crank triggered ignition. The prop would turn the right way around

with Tracy's 2.17 reduction, so the prop choices might be

bigger and the "P"

factor would be what you are used to.

Lynn E. Hanover

Lynn, and group,
 While it wasn't his greatest success Everett Hatch built a reverse rotation engine. It is much easier if you run peripheral ports. I believe Everett did this to get "correct" rotation as well. Alan Tolle said this engine was a real odd ball. It was plugs up as well as reverse rotation! I agree with Paul though if you run it backward the water channels in the housings will be all wrong. Bill jepson

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.