Subject: Aluminum cylinder heads / compression ratio
From: ACRE
Date: 2/4/2004, 11:58 PM

"Powell, Ken" wrote:

This isn't a rotary question but with all the info being discussed about coolants and head temps I thought I would ask a question of the group. I am about to pass 200,000 miles on my '89 5.0 Mustang and I am considering building a new engine.  This is my daily driver and I want to run regular gas.  The stock engine (still bone stock) has a 9.2 compression ratio with the stock cast iron heads.  I want to use aluminum heads on the new engine so my question is:  How much higher compression can I use and still use the same timing specs and regular gas?  I know that the aluminum heads will run cooler and will tolerate more compression before detonation but I don't have a clue as to how much - I would guess about a 0.5 increase (from 9.2 to about 9.7).
Paul, Bill, any hot rodder out there - help would be appreciated????

Thanks,
Ken Powell

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.