Subject: Major Break through in rotary engine cooling.
From: ACRE
Date: 2/5/2004, 11:15 AM


I think you are missing something here Jon. When you are in a car or a boat and your engine boils over it is not life threatening. You pull over to the side of the road
or row home.  Not so in an airplane. Perhaps having the boiling temp (not necessarily the operating temp) up around 300 degrees is a safety issue. Perhaps we can find something better than 90%, 95% or pure ethylene glycol. I think it is a
worthwhile goal.

Paul Lamar


Paul and group,
I think this last statement is the crux of
this whole thread. I do understand the desire
to run the engine at higher temps. The
biggest reason to do this is to improve
OVERALL EFFICIENCY. This is the rationale
behind the Voyager engine. Maximum POWER as
opposed to efficiency is usually achieved at
slightly lower temperatures. For us the ability
to have a much wider "dynamic range" is an
admirable goal. To fly long climbs without
worry of overheat is a good goal. Looking at
alternate solutions is a good way to do this.
Once we have a successful standard installation
looking to "better living through chemistry"
seems fine. The 30psi pressure system is the
first in a long line of the needed upgrades.
Bill Jepson

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.