Subject: Major Break through in rotary engine cooling.
From: ACRE
Date: 2/6/2004, 2:35 PM


     Good points Jon. One big difference is the big trucks go
     up the hill
     at
     30 MPH where the dynamic pressure to force air through the
     rad is
     1/4 of what it is at 60 MPH. With a big rad you can use a
     bigger
     higher
     HP fan. On a five percent grade at 30 mph or 44 FPS
     forward speed
     is 2.2 FPS straight up. At 60,000 pound gross weight that
     is  132,000
     ft pound seconds or 240 HP not counting the considerable
     tire rolling
     drag. That is why they only go 30 MPH.

     Paul Lamar

Which also confirms that cars / pickups towing trailers throught the
mountains DON'T run rated power -- and apparantly they STILL
overheat! Don't know of too many pick-up trucks towing 30 tons in
their trailers... Or 15 tons. Or even 5 tons, certainly not for very
long or up very steep hills. The real point here is that the truck
cooling system is designed for continuous rated power operation. NO
car or light truck cooling system is. The "towing package" makes it
better, but still not anywhere near capable of continuous full
power.

Jon

Many pick up trucks and SUV's are rated at 8000 pounds towing and they
themselves weigh in the neighbor hood of 5000 to 6000 pounds for a
total weight of 13,000 to 14,000 pounds or 7 tons. They do this at 50
to 60 MPH which is 4.4 fps straight up or 112 HP not counting aero
drag or rolling drag. As I said about 150 HP. Towing a house trailer
would be higher due to the increased aero drag. My guess is the pick
up SUV manufacturers design for 5% grade at the speed limit of around
65 MPH. We have the rare 11% grades here in the mountains. Then there
is our friend Bryan in
BC climbing 5% grades at 50 MPH with 27,000 pounds with the A4OD tx
and they don't put that in big trucks :) Any problems with overheating
Bryan?

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.