Subject: Major Break through in rotary engine cooling.
From: ACRE
Date: 2/6/2004, 8:28 PM


     Many pick up trucks and SUV's are rated at 8000 pounds
     towing and they
     themselves weigh in the neighbor hood of 5000 to 6000
     pounds for a
     total weight of 13,000 to 14,000 pounds or 7 tons. They do
     this at 50
     to 60 MPH which is 4.4 fps straight up or 112 HP not
     counting aero
     drag or rolling drag. As I said about 150 HP. Towing a
     house trailer
     would be higher due to the increased aero drag. My guess
     is the pick
     up SUV manufacturers design for 5% grade at the speed
     limit of around
     65 MPH. We have the rare 11% grades here in the mountains.
     Then there
     is our friend Bryan in
     BC climbing 5% grades at 50 MPH with 27,000 pounds with
     the A4OD tx
     and they don't put that in big trucks :) Any problems with
     overheating
     Bryan?

     Paul Lamar

OK, 150 hp intermittent, and pretty much worst case. The engine
itself is "rated" at somewhere approaching 300hp.
Jon

Generally they derate pick up truck engines. Most I would say are
rated at less than 250 HP. A Ford F250 with a turbo diesel which is
considered a heavy duty pick up truck engine is 250 HP but with gobs
of
torque down low. Somebody on here said about 600 to 800 foot pounds.
 
BTW This Dodge V8 pick up rad is almost the same frontal area as
a Peterbuilt :) It is only about 3/4 of an inch thick however.
The first half does 3/4 of the work.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.