Hey all, I am not usually a silent lurker but my time behind the computer limits how much I can contribute. I wish to let you know that my test mule on the stand will be able to provide the data for this. I have a 91 13BT on a test stand that has all the latest coatings on all the surfaces. I made an attempt to do something really different in the interest of cooling. I have used all the coatings one time or another on my piston engines with great success but never on the rotary. I have done all the research on coatings and as long as the temperatures can be controlled, the coatings will stay intact. I have been working on this engine a long time. The motor is done and I am fabricating a new motor mount to fit the larger turbo. Unfortunately my employment has slowed my progress down but I hope to have the data collected by mid to late April. I do not plan to use this engine in
an aircraft but the data I collect will allow me to use it for future builds with the intent of using it in my RV-6 aircraft. The only thing I wish I had done when I started this was to add one coating at a time for testing. That would have given me the true data but that was really cost prohibitive. I will report my findings.
Doug Mueller
RX-6 13BT
N900DM
Henderson,NV
Great Doug I am glad to have another contributor to some of the test
info we sorely need. To evaluate the coatings comprehensively you need
some thermal
couples installed near the combustion chamber walls as in this jpg. If
you need help installing this let me know.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.