Subject: Major Break through in rotary engine cooling. History
From: ACRE
Date: 2/10/2004, 11:24 AM


 > > > My "passion" on this has nothing to do with marine applications,
 > > > where cooling is really, really, really easy, as you say. It comes
 > > > from having been down this path before (yes, for aviation
 > > > applications), and I'm just trying to give you the benefit of my
 > > > experience. I will NOT say that you shouldn't try things... the only
 > > > opinion that matters in all this is that demonstrated by the ENGINE!
 > > > So, despite how I might come across, I heartily encourage you to try
 > > > stuff and share the results... But I would use a great deal of
 > > > caution in drawing conclusions without the benefit of sufficient
 > > > testing.

 > > The fact that Ken used Evans PG for 1100 hours without cooling
 > > > problems is very encouraging. PG has similar characteristics as a
 > > cooling fluid to pure EG.
 > >
 > > Paul Lamar
 >
 > "Weinstock, Rob" wrote:
 > >
 > > The last time I plowed through the Evans website, I discovered that PG
 > > is much more viscous than water. The implication is that the standard
 > > water pump probably won't be sufficient, and indeed there are "heavy
 > > duty" water pumps sold on the Evans website for common engines, e.g.,
 > > Chevy small block. The other consideration is that the power required to
 > > drive the pump will be greater, too.
 > >
 > > I would think that if this stuff were so great, it would popular with
 > > say, diesel truck fleet owners. But, it isn't, yet.
 > >
 > > Regards,
 > >
 > > Rob--


 In working with liquid cooled rockets, the only thing that was demonstrated
 better than water was hydrogen. With water you can extract heat at up to
 about 20 BTUs per square inch second (that is second - 1/60th 0f a minute)
 That is way higher than you could possibly ever use, With about 6000F
 and 3000psi on the shuttle engine they are pulling about 90 BTU/inch
 squared second at the sonic throat.
 Vance


  Actually I only ran the Evans cooling for about 400 hrs and the rest
of the time I used Sierra.
  Another benefit to the higher viscosity is that it will keep the
bearing from going out in the event of a water leak into the oil, at
least that is the word from the people in the diesel world.

   Ken

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.