More interesting info from Vee's for Victory.
This is supercharger HP consumption verses pressure ratio or
boost looking at it another way. Allison also strangely plotted
altitude on here which threw me at first. Then I realize they
were talking about a flat rated engine. Constant HP as altitude
increased. I think that is possible with a fixed gear ratio super
charger by controlling the throttle opening.
The several lines plotted are supercharger efficiency which is
unlikely to
exceed 80%. Never the less the bottom line is 100% efficiency and is a
law
of physics having to do with what happens when you compress a gas. No
way around that.
The left vertical axis is pounds of air per second. At a fuel burn
of 10 gallons and hour you are using 60 pounds of fuel per hour.
One pound per minute and .0166 pounds per second.
At a mixture ratio of 12:1 (air to fuel) you are burning .2 pounds
of air per second.
So the chart is for 35 HP per pound of air per second at 60% eff.
So the supercharger HP consumed for our purposes with a fuel burn
of 10 gallons an hour and a boost pressure of 1.5 atmospheres or
7.5 PSI would be about .2 times 35 HP or 7 HP if I am doing this
right.
10 gallons an hour fuel burn at a BSFC of .5 would be about 120 gross
HP
or 113 HP net less the supercharger HP consumed. That should increase
the BSFC (fuel burn) to about .53 as I see it.
Is this about what you are seeing Jon?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.