Subject: Engines-List: Sun 'n Fun 2004 Rotary Engine Discussions
From: ACRE
Date: 2/11/2004, 1:10 AM

Phil Flaugher wrote:

Didn't know if anyone in the group was aware....

Phil

This is an invitation to participate in rotary engine discussions
at Sun 'n Fun 2004.


Where: Rotary engine forum tent

(This is to the left as you enter the show grounds through the
MAIN ENTRANCE gate. Look for the large white tents set up on both
sides of the sidewalk.  There will be a ROTARY ENGINE banner hooked
over the table inside the tent or maybe outside the tent.)


When: Tuesday, April 13th; and Saturday, April 17th [12:30PM -
1:30 PM on both days]


Purpose:

- Meet builders who have already installed the Mazda rotary engine
in their aircraft.

- Meet other builders who are considering or planning to install
the rotary engine in their aircraft.

- Vet subsystem alternatives.

- Establish a builder's network for those new to
rotary-auto-conversion.


Organizer: John Burns: jgburns@comcast.net

Resident Expert: Tracy Crook (as usual, Tracy and Laura Crook will
bring engine parts, accessories, flip charts and videos)


Please let me know if and when you plan to participate (reply to
me, not the list please).


Thanks,

John

http://mywebpages.comcast.net/jgburns/Engine/Engine.html


P.S.

If you're interested in why I'm doing this, read on:


I think the Mazda rotary engine is an excellent power-plant
alternative, and I plan to install the Renesis model in my RV-7A.
It's a task that warrants input if not mentoring.  While I'm
comfortable with the engine decision, accessory and subsystem
decisions concern me.


Here's what I'm thinking:

- The news groups are great, but nothing beats meeting possible
mentors and other rotary builders face-to-face.

- It's a high-risk undertaking for inexperienced builders; the
probability of implementing a reliable rotary conversion goes up
with a support network.

- Sub-system trade-offs need to be made: Builders who are
inexperienced with rotary-auto-conversions should benefit from
discussions about cooling, exhaust systems, engine mounting, PSRUs,
ignition/fuel-injection control, intake manifolds ...

- It would be good (for moral support) to meet other builders who
plan to install a Mazda rotary conversion in their aircraft.

We do it every year. I am a volunteer and will probably also give a
couple of
forums on cooling and motor mount design.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.